Untitled

Storefront and Window Gates

* All Standard Gates Come With A 1 Year Manufacturers Warranty

* Custom Powder Coated Colors Available Upon Request

Storefront Security Gates

An economical solution to after hours security, providing stress-free storefront protection from smash and grabs and casual break-ins.

TOP TRACK SECURITY GATES

Top Track Storefront Security Gates allow the gate to be hung much like a curtain across any span — so they always remain within the track. This type of track gate is recommended for storefront openings over 20 feet wide and can be used to secure openings spanning several hundred feet.

A top track gate can be used with optional “L” brackets as well as utilize optional “pin” rails — and set into the floor like a standard Dock Door Gate. If the pin rails are not used, the gate is essentially suspended from the top rail.

For all Top Track Storefront Security Gate configurations, there is a loss in height of about 6” as the gate is expanded. There will always be a 6” gap between the top of the gate and below the top track.

All Illinois Engineered Products gates have a galvanized steel finish. Our gates withstand 4-Season weather like heat, rain and snow and won't be harmed by harsh industrial chemicals and cleaners. They are virtually maintenance free and deliver both a higher level of security with a lower cost of ownership.

All orders come with brackets, bearing washers and casters for an easy and complete installation.

We Can Build a Custom Storefront Security Gate for any application. Our storefront security gates can protect a single access point or provide a complete front-line wall of security.

WINDOW GATE

Designed to provide a more stable and secure storefront window gate. Bottom Track Storefront Gates are installed along the inside of storefront windows utilizing a continuous frame effect for structural strength and stability.

Storefront Gates pivot 180 Degrees on their mountings — they pivot out of the opening and swing flat remaining virtually invisible while not in use — customers will never know they are there. For added stability, bottom track designs can use an “H” bracket when locking two portions together.

For all gate configurations, there is a loss in height of about 6” as the gate is expanded. The stack width of a gate is approximately 1” to 2” per foot of travel.

Our Storefront Gates stand up to 4-season weather like heat, rain and snow and they won't be harmed by harsh industrial chemicals and cleaners. With a galvanized finish, these Storefront Gates are virtually maintenance free, delivering the best in security with a lower cost of ownership.

All gate orders come with brackets, bearing washers and casters for easy and complete installation.

Illinois Engineered Products Storefront Gates can be customized to fit any security need. Storefront gates can protect a single access point or provide a complete front-line wall of security.

PAIR STORE SECURITY GATES

Both Top Track and Bottom Track gates can be locked together as a pair in multiple spots along the entire span of an opening.

For all gate configurations, there is a loss in height of about 6” as the gate is expanded. The stack width of a gate is approximately 1” to 2” per foot of travel.

All Illinois Engineered Products gates have a galvanized steel finish. Our gates withstand 4-season weather like heat, rain and snow and they wont be harmed by harsh industrial chemicals and cleaners. They are virtually maintenance free with a lower cost of ownership.

All gate orders come with brackets, bearing washers and casters for easy and complete installation.

We can build a Custom Store Security Gate for any application. Our Store Security Gates can protect a single access point or the entire facade of a store front.

X-tra Duty Storefront Gates

Designed to provide the Most stable and secure store window gate available. The Xtra-duty Store Gate is housed in a continuous frame on all sides including top and bottom tracks, and utilizes vertical bars that do not lose height when opened.

All Xtra-duty Store Gates come in a galvanized finish that never needs maintenance— delivering a higher level of security with a lower cost of ownership. They stand up to 4-season weather like heat, rain and snow and they won't be harmed by harsh industrial chemicals and cleaners. They are virtually maintenance free.

Need Custom Store Gates? No Problem! All gate models can be easily customized to fit any store front security need. Our store gates can protect a single access point or provide a complete front-line wall of security. All gate orders come with brackets, bearing washers and casters for easy and complete installation.